Green Motors Inc. Store
Welcome
#FB1-4001A ADC 9 inch series motor
double shafted
28 HP, 72-144 volts
for EV's op to 5000lbs
143 lbs.
$1766.00
#FB1-4001
ADC 9 inch series motor
single shafted
28 HP, 72-144 volts
for EV's op to 5000lbs
143 lbs.
$1751.00
DC Power Systems
Raptor 1200 Amp controller, 156 volt max
Rev. controller, Led status display, Fan cooled.
20 lbs.
$2860.00
Zivan charger NG-3
120 volt input
must specify voltage and batteries when ordering.
15 lbs.
$1060.00
Zivan NG1-DC, DC-DC converter, 108-168 volt input converts to 14 V /
55 amps continious duty. For 12 volt auto systems lights, radio, etc.
6 lbs.
$540.00
Convert It Book
Step by step instructions for converting your vehicle to electric power. Great for the first timer.
2 lbs.
$36.00
Build Your Own Electric Vehicle Book, large amount of information, specs., formulas,etc. Great as a textbook.
3 lbs.
$36.00
Tee Shirt, Funny
If Momma (earth) aint Happy, Nobody is Happy!!!!
1 lbs.
$15.00
10 Position Barrior Strip
for wiring connections.
8 oz.
$15.00
2/0 Welding Cable
copper stranded wire for good flexibility, black rubber exterior,
systems up to 1000A.
1 lbs. per foot
$5.00 per foot
1/0 Welding Cable
copper stranded wire Forgood flexibility, black rubberexterior, systems up to 400 A.
1lbs. per foot
$4.50 per foot
Tinned Heavy Duty Angled Lugs, available in 45 and 90 degree, hle sizes available: 5/16, 3/8, 1/2
2 oz.
$4.50 ea.
Copper Regular duty Lugs, Hole sizes available: 5/16, 3/8, 1/2
1oz.
$3.50 ea.
Tinned Regular Duty Lugs, hole sizes available: 5/16, 3/8, 1/2
1 oz.
$3.75 ea.
Tinned Heavy Duty Lugs, hole sizes available: 5/16, 3/8, 1/2
2 oz.
$4.25 ea.
Polyolefin Shrink Tube
Red, for cable lugs 3/0 to 1 GA, has internal meltable adhesive for a great seal.
1 oz.
$.60 ea.
Polyolefin Shrink Tube Black, for cable lugs 3/0 to 1 GA, has internal meltable adhesive for a great seal.
1 oz.
$.60 ea.
ELECTRIC Emblem
peel and stick adhesive on back
2oz.
$7.75
Magnecraft Relay
DPDT 120 volt coil, for charger interlocks.
1 lbs.
$18.55
Westberg Voltmeter
0-180 volts, others available, please call.
1 lbs.
$61.80
Westberg Ammeter
0-500 amps, for use with 500A-50mv shunt,
others available, please call
1 lbs.
$61.80
Hubbell flanged recessed power plug,
120 volt, for plugging in your EV, fits nicely in the fuel door cavity, others available.
2oz.
$29.35
Xantrex Link-10 DC-DC converter, required for use where 12 volt power is not isolated from the high volt pack
8 oz.
$46.35
XantreX Link-10 prescaler, required for battery packs 100-500 volts
2 lbs.
$180.25
XantreX Link-10 battery monitor, displays volts, amps, Ah( or kWh), percent of charge. Has inputs for temperature.
1 lbs.
$291.75
Albright SW-200 Main contactor, 250 amp/ 120 volt max, 12 volt coil.
4 lbs.
$140.00
Curtis PB-6
throttle potbox
0-5 Kohm, for use with existing accelerator pedal and linkage
1 lbs.
$82.40
Stud block insulator
standoff insulator, used for large fuses and power terminal junctions.
8 oz.
$5.25 ea.
Ferraz/Shawmut Fuse
800 amp/300volt DC
For controllers up to 1400 amps. Other sizes available, please call.
4 lbs.
$ 51.50
Albright Main Breaker
250 amp, for controllers up to 800 amps. Use 2 in parallel for higher amp controllers.
2 lbs.
$180.25
Glastic Standoff insulator 600V/DC
use 2 for each main breaker.
8 oz.
$5.25 ea.
Deltek Shunt 500 amps
= 50mv, for use with ammeter and XantreX link-10 monitor. Other sizes available, please call.
2 lbs.
$23.25